Specifications

CM-X300 CoM
14 CM-X300 Reference Guide Rev 1.31 30-Dec-2010
Figure 3 CM-X300 Bottom View Diagram
Table 7 Bottom Side Components
Reference
Function
P1
CAMI connector A
P2
CAMI connector B
3.2 Connectors Pinout
3.2.1 Interface Connectors
CAMI signal names, as described in the CAMI Specification as of February 4, 2004, are
listed in the tables below. Signal descriptions may be found in the CM-X072 User‘s
Manual. CAMI names are provided for easy comparison with previous modules.
3.2.1.1 Connector A
Table 8 Connector A (P1) pinout
Conn-Pin
CM-X300 Signal
Name
Reference
CAMI Signal Name
P1-01
ETH1-TDP
LAN Port, page 22
ETH1-TDP
P1-02
ETH1-RDN
LAN Port, page 22
ETH1-RDN
P1-03
ETH1-TDN
LAN Port, page 22
ETH1-TDN
P1-04
ETH1-RDP
LAN Port, page 22
ETH1-RDP
P1-05
ETH1-SPEED#
LAN Port, page 22
ETH1-LINK100#
P1-06
ETH1-LINK-ACT#
LAN Port, page 22
ETH1-LINK10#
P1-07
VCHRG
Power, page 39
VCORE
P1-08
GND
Power, page 39
GND
P1-09
WP1#
System Signals, page 39
WP1#
P1-10
N.C.
No Connect
ETH1-ACT#
P1-11
RST-IN#
System Signals, page 39
RST-IN#
P1-12
N.C.
No Connect
SPARE
P1-13
KP_MKOUT0
GPIO121
Keypad, page 27
CPU GPIO, page 34
GPIO0
P1-14
GND
Power, page 39
GND
P1-15
KP_MKOUT2
GPIO123
Keypad, page 27
CPU GPIO, page 34
GPIO2