Instructions / Assembly

| 3
HARDWARE
TOOLS REQUIRED
APPROXIMATELY
45 MIN.
ASSEMBLY
1 PERSON
ASSEMBLY
PHILLIPS
SCREWDRIVER
330 LBS
CAPACITY
LBS
• Please do not exceed the weight limitations of this item.
• Do not stand on or use any part of this item as a step ladder.
• Firmly secure all bolts, screws and knobs before use.
• Reconfirm that all bolts, screws, and knobs are secure every 90 days.
• Fasten screws loosely during initial assembly. Do not firmly tighten the screws until the item is
completely assembled.
• Do not use or store this item in the proximity of open flame or flammable/combustible chemicals.
• Be aware that some parts are heavy and have sharp edges.
• If any parts are missing, broken, damaged, or worn, stop using this product until repairs are made
and/or factory replacement parts are installed.
• Do not use this item in a way inconsistent with the manufacturer’s instructions as this could void the
product warranty.
NOTICE
Please retain these instructions for future reference.
ALLEN WRENCH
(PROVIDED)
a
59 PCS
M3.5 x 40mm
SCREW
M8 x 55mm
SCREW SET
b
4 PCS
M8 x 55mm
BOLT SET
c
6 PCS
DRILL
(RECOMMENDED)
Due to large amount of screws,
use of an electric drill is highly
recommended to save time.