User Manual
Table Of Contents
- Contents/Contenido
- ENGLISH
- Safety information and specifications
- This product contains small items that could be a choking hazard if swallowed. Keep these items away from young children!
- Features
- Tools needed
- Package contents
- Installation instructions
- STEP 1- Determine whether your TV has a flat, irregular, or obstructed back
- STEP 2 - Select screws, washers, and spacers
- STEP 3 - Installing the TV plate
- Option 1: Installing the TV plate to TVs with a flat back
- OR
- Option 2: Attaching the TV plate to TVs with irregular or obstructed backs
- STEP 4 - Determine wall-mount location
- STEP 5 - Option 1: Install on a wood stud wall
- STEP 5 - Option 2: Install on a solid concrete or concrete block wall
- STEP 6 - Mounting your TV
- STEP 7 - Adjusting the TV Mount Angle
- ONE-YEAR LIMITED WARRANTY
- ESPAÑOL
- INFORMACIÓN DE SEGURIDAD Y ESPECIFICACIONES
- Este producto contiene piezas pequeñas que representan un peligro de asfixia si se tragan. ¡Mantenga estas piezas alejadas de los niños!
- Características
- Herramientas requeridas
- Contenido del paquete
- Instrucciones de instalación
- PASO 1 - Determine si su televisor tiene una parte posterior plana, irregular u obstruida.
- PASO 2 - Selección de los tornillos, arandelas y espaciadores
- PASO 3 - Instalación de la placa del televisor
- Opción 1: Instalación de la placa del televisor a los televisores con parte posterior plana
- O
- OPCIÓN 2: Instalación de la placa del televisor para televisores con partes posteriores irregulares u obstruidas
- PASO 4 - Determine la ubicación del montaje en pared
- PASO 5: Opción 1: Instale en una pared con viga de madera
- PASO 5: Opción 2: Instalación en una pared de concreto sólido o de bloques de concreto
- PASO 6 - Montaje del televisor
- PASO 7 - Ajuste del ángulo de montaje del televisor
- GARANTÍA LIMITADA DE UN AÑO
7
Small Tilt Mount for Most TVs up to 50”
www.bestbuy.com/bestbuyessentials
STEP 2 - Select screws, washers, and spacers
1 Select the hardware for your TV (screws, washers, and spacers). A limited number of
TVs come with mounting hardware included. (If there are screws that came with
your TV, they are almost always in the holes on the back of your TV.) If you don't
know the correct length of the mounting screws your TV requires, test various sizes
by hand-threading the screws.
Select one of the following types of screws:
For a TV with a flat back:
• M5 × 20 mm screws (B)
• M6 × 20 mm screws (D)
• M8 × 20 mm screws (F)
For a TV with an irregular/obstructed back:
• M4 × 35 mm screws (A)
• M5 × 35 mm screws (C)
• M6 × 35 mm screws (E)
• M8 × 36 mm screws (G)
If you use M4/M5 screws, select the M4/M5 washer (I) or if you use M6 or M8 screws,
select the M6/M8 washer (J). For an irregular or obstructed TV back, also use the
spacers (H).
2 Remove the screws from the holes in the back of your TV.
CAUTION: To avoid potential personal injuries and property damage, make sure that there are
adequate threads to secure the brackets to your TV. If you encounter resistance, stop
immediately and contact customer service. Use the shortest screw and spacer combination to
accommodate your TV. Using hardware that is too long may damage your TV. However, using a
screw that is too short may cause your TV to fall from the mount.
Screw is
too long
Screw fits
correctly
Screw is
too short