User Manual
Table Of Contents
- Contents/Contenido
- ENGLISH
- Safety information and specifications
- This product contains small items that could be a choking hazard if swallowed. Keep these items away from young children!
- Features
- Tools needed
- Package contents
- Installation instructions
- STEP 1- Determine whether your TV has a flat, irregular, or obstructed back
- STEP 2 - Select screws, washers, and spacers
- STEP 3 - Installing the TV plate
- Option 1: Installing the TV plate to TVs with a flat back
- OR
- Option 2: Attaching the TV plate to TVs with irregular or obstructed backs
- STEP 4 - Determine wall-mount location
- STEP 5 - Option 1: Install on a wood stud wall
- STEP 5 - Option 2: Install on a solid concrete or concrete block wall
- STEP 6 - Mounting your TV
- STEP 7 - Adjusting the TV Mount Angle
- ONE-YEAR LIMITED WARRANTY
- ESPAÑOL
- INFORMACIÓN DE SEGURIDAD Y ESPECIFICACIONES
- Este producto contiene piezas pequeñas que representan un peligro de asfixia si se tragan. ¡Mantenga estas piezas alejadas de los niños!
- Características
- Herramientas requeridas
- Contenido del paquete
- Instrucciones de instalación
- PASO 1 - Determine si su televisor tiene una parte posterior plana, irregular u obstruida.
- PASO 2 - Selección de los tornillos, arandelas y espaciadores
- PASO 3 - Instalación de la placa del televisor
- Opción 1: Instalación de la placa del televisor a los televisores con parte posterior plana
- O
- OPCIÓN 2: Instalación de la placa del televisor para televisores con partes posteriores irregulares u obstruidas
- PASO 4 - Determine la ubicación del montaje en pared
- PASO 5: Opción 1: Instale en una pared con viga de madera
- PASO 5: Opción 2: Instalación en una pared de concreto sólido o de bloques de concreto
- PASO 6 - Montaje del televisor
- PASO 7 - Ajuste del ángulo de montaje del televisor
- GARANTÍA LIMITADA DE UN AÑO
13
Small Tilt Mount for Most TVs up to 50”
www.bestbuy.com/bestbuyessentials
3
Drill three pilot holes through the template to a depth of 2.4 in. (60 mm) using a
1/8 in. (3.5 mm) drill bit, then remove the template.
4 Place the magnetic level on the top of the wall plate, then align the wall plate with
the pilot holes, insert the lag bolts (B1) through the lag bolt washers (B3) and
through the holes in the wall plate. Make sure that the wall plate is level.
5 Tighten the lag bolts only until they are firm against the wall plate. Remove the
magnetic level.
2.4 in. (60 mm)
1/8 in. (3.5 mm)
Drill
Wood stud