User Manual
Table Of Contents
- Contents/Contenido
- ENGLISH
- Safety information and specifications
- This product contains small items that could be a choking hazard if swallowed. Keep these items away from young children!
- Features
- Tools needed
- Package contents
- Installation instructions
- STEP 1- Determine whether your TV has a flat, irregular, or obstructed back
- STEP 2 - Select screws, washers, and spacers
- STEP 3 - Installing the TV plate
- Option 1: Installing the TV plate to TVs with a flat back
- OR
- Option 2: Attaching the TV plate to TVs with irregular or obstructed backs
- STEP 4 - Determine wall-mount location
- STEP 5 - Option 1: Install on a wood stud wall
- STEP 5 - Option 2: Install on a solid concrete or concrete block wall
- STEP 6 - Mounting your TV
- STEP 7 - Adjusting the TV Mount Angle
- ONE-YEAR LIMITED WARRANTY
- ESPAÑOL
- INFORMACIÓN DE SEGURIDAD Y ESPECIFICACIONES
- Este producto contiene piezas pequeñas que representan un peligro de asfixia si se tragan. ¡Mantenga estas piezas alejadas de los niños!
- Características
- Herramientas requeridas
- Contenido del paquete
- Instrucciones de instalación
- PASO 1 - Determine si su televisor tiene una parte posterior plana, irregular u obstruida.
- PASO 2 - Selección de los tornillos, arandelas y espaciadores
- PASO 3 - Instalación de la placa del televisor
- Opción 1: Instalación de la placa del televisor a los televisores con parte posterior plana
- O
- OPCIÓN 2: Instalación de la placa del televisor para televisores con partes posteriores irregulares u obstruidas
- PASO 4 - Determine la ubicación del montaje en pared
- PASO 5: Opción 1: Instale en una pared con viga de madera
- PASO 5: Opción 2: Instalación en una pared de concreto sólido o de bloques de concreto
- PASO 6 - Montaje del televisor
- PASO 7 - Ajuste del ángulo de montaje del televisor
- GARANTÍA LIMITADA DE UN AÑO
12
BE-MSTILT
www.bestbuy.com/bestbuyessentials
STEP 5 - Option 1: Install on a wood stud wall
You’ll need
1 Locate the center of a stud with a stud finder.
2 Align the center of the wall plate template at the height (a + b) you determined in
the previous step, make sure that the template is level, then tape it to the wall.
Make sure that the template holes are on the stud and the template is level.
Note: It is very important that the wall plate is level. This determines if the TV will be level
when extended from the wall.
1/8" wood drill bit
Wall plate (1)
Edge-to-edge stud finder
Measuring tape
Drill
B1 (3)
B3 (3)
Adjustable wrench
Pencil
Wall plate template
Magnetic level (1)
Wood
stud
Pencil
Stud
finder
Pencil
Level
Tem pl at e