User Manual

7
Small Fixed Wall Mount for TVs up to 50" / Montaje de pared pequeño fijo para televisores de hasta 50 pulg.
www.bestbuy.com/bestbuyessentials
STEP 2 - Select screws, washers, and spacers
1 Select the hardware for your TV (screws, washers, and spacers). Some TVs come
with mounting hardware included (usually in the holes on the back of the TV.) If
you don't know the correct length of the mounting screws your TV requires, test
various sizes by hand threading the screws.
A Select one of the following types of screws:
B Select from the following washers:
C For an irregular or obstructed TV back, use aspacer (I) or (J).
4 Remove the screws.
5 For a flat back TV, go to “STEP 3 - Option 1: Attaching the mounting hardware to
TVs with a flat back“ on page 8.
-OR-
For an irregular or obstructed back, go to “STEP 3 - Option 2: Attaching the
mounting hardware to TVs with irregular or obstructed backs” on page 9.
Flat back Obstructed back
M4 × 12 mm screws (D) M4 × 20 mm screws (E)
M4 × 20 mm screws (E) M4 × 30 mm screws (F)
M6 × 12 mm screws (K) M6 × 20 mm screws (L)
M6 × 20 mm screws (L) M6 × 35 mm screws (M)
M8 × 16 mm screws (N) M8 × 20 mm screws (O)
M8 × 20 mm screws (O) M8 × 36 mm screws (P)
M5 washer (G)M6/M8 washer(H)
CAUTION: To avoid potential personal injuries and property damage, make sure
that there are adequate threads to secure the brackets to your TV. If you encounter
resistance, stop immediately and contact customer service. Use the shortest screw
and spacer combination to accommodate your TV. Using hardware that is too long may
damage your TV. However, using a screw that is too short may cause your TV to fall from
the mount.
Screw is
too long
Screw fits
correctly
Screw is
too short