User Manual

14
www.bestbuy.com/bestbuyessentials
BE-MSFX
4 Align the wall plate (A) with the anchors (S), insert the lag bolts (R) through the lag
bolt washers (Q), then through the holes in the wall plate. Tighten the lag bolts only
until they are firm against the wall plate.
CAUTION: Avoid potential injuries or property damage! DO NOT over-tighten the
lag bolts (R).
You’ll need
Concrete wall
Level
R (4)
Drill
Level
Q (4)
Wall plate (A)
7/16" masonry
drill bit
S (4)
Pencil
1/2" socket wrench
Tape