User Manual

12
www.bestbuy.com/bestbuyessentials
BE-MSFX
4 Align the wall plate (A) with the pilot holes, insert the lag bolts (R) through the lag
bolt washers (Q), then through the holes in the wall plate. Tighten the lag bolts only
until they are firm against the wall plate.
CAUTION: Avoid potential injuries or property damage! DO NOT over-tighten the
lag bolts (R).
You’ll need
Level
Wood stud
Edge-to edge
stud finder
R (4)
Drill
3/17" wood drill
bit
1/2" socket wrench
Level
Wall plate (A)
Pencil
Q (4)
Tape