User Manual
Table Of Contents
- Contents/Contenido
- ENGLISH
- Safety information and specifications
- This product contains small items that could be a choking hazard if swallowed. Keep these items away from young children!
- Features
- Tools needed
- Package contents
- Installation instructions
- STEP 1- Determine whether your TV has a flat, irregular, or obstructed back
- STEP 2 - Select screws, washers, and spacers
- STEP 3 - Installing the TV plate
- Option 1: Installing the TV plate to TVs with a flat back
- OR
- Option 2: Attaching the TV plate to TVs with irregular or obstructed backs
- STEP 4 - Determine wall-mount location
- STEP 5 - Option 1: Install on a wood stud wall
- STEP 5 - Option 2: Install on a solid concrete or concrete block wall
- STEP 6 - Mount your TV to the wall plate
- STEP 7 - Managing your cables
- ONE-YEAR LIMITED WARRANTY
- ESPAÑOL
- Información de seguridad y especificaciones
- Este producto contiene piezas pequeñas que representan un peligro de asfixia si se tragan. ¡Mantenga estas piezas alejadas de los niños!
- Características
- Herramientas requeridas
- Contenido del paquete
- Instrucciones de instalación
- PASO 1 - Determine si su televisor tiene una parte posterior plana, irregular u obstruida.
- PASO 2 - Selección de los tornillos, arandelas y espaciadores
- PASO 3 - Instalación de la placa del televisor
- Opción 1: Instalación de la placa del televisor a los televisores con parte posterior plana
- O
- OPCIÓN 2: Instalación de la placa del televisor para televisores con partes posteriores irregulares u obstruidas
- PASO 4 - Determine la ubicación del montaje en pared
- PASO 5: Opción 1: Instale en una pared con viga de madera
- PASO 5: Opción 2: Instalación en una pared de concreto sólido o de bloques de concreto
- PASO 6 - Fijación del televisor a la placa para pared
- PASO 7 - Organización de sus cables
- GARANTÍA LIMITADA DE UN AÑO
18
BE-MSFM
www.bestbuy.com/bestbuyessentials
STEP 7 - Managing your cables
• Thread cables for attached devices along the mounting arm, then snap the cable clip
onto the mounting arm.
STEP 8 - Adjusting the TV Mount
Leveling the TV
• If the TV screen in not level, loosen the upper and lower nuts (M6) with the 6 × 6 Allen
wrench and adjust the level, then tighten the nuts.
Note: If the TV screen does not tilt down, use a wrench to adjust the left and right two
nuts on the TV plate.
Cable clip
Cables
6 x 6 Allen wrench