User Manual
Table Of Contents
- Contents/Contenido
- ENGLISH
- Safety information and specifications
- This product contains small items that could be a choking hazard if swallowed. Keep these items away from young children!
- Features
- Tools needed
- Package contents
- Installation instructions
- STEP 1- Determine whether your TV has a flat, irregular, or obstructed back
- STEP 2 - Select screws, washers, and spacers
- STEP 3 - Installing the TV plate
- Option 1: Installing the TV plate to TVs with a flat back
- OR
- Option 2: Attaching the TV plate to TVs with irregular or obstructed backs
- STEP 4 - Determine wall-mount location
- STEP 5 - Option 1: Install on a wood stud wall
- STEP 5 - Option 2: Install on a solid concrete or concrete block wall
- STEP 6 - Mount your TV to the wall plate
- STEP 7 - Managing your cables
- ONE-YEAR LIMITED WARRANTY
- ESPAÑOL
- Información de seguridad y especificaciones
- Este producto contiene piezas pequeñas que representan un peligro de asfixia si se tragan. ¡Mantenga estas piezas alejadas de los niños!
- Características
- Herramientas requeridas
- Contenido del paquete
- Instrucciones de instalación
- PASO 1 - Determine si su televisor tiene una parte posterior plana, irregular u obstruida.
- PASO 2 - Selección de los tornillos, arandelas y espaciadores
- PASO 3 - Instalación de la placa del televisor
- Opción 1: Instalación de la placa del televisor a los televisores con parte posterior plana
- O
- OPCIÓN 2: Instalación de la placa del televisor para televisores con partes posteriores irregulares u obstruidas
- PASO 4 - Determine la ubicación del montaje en pared
- PASO 5: Opción 1: Instale en una pared con viga de madera
- PASO 5: Opción 2: Instalación en una pared de concreto sólido o de bloques de concreto
- PASO 6 - Fijación del televisor a la placa para pared
- PASO 7 - Organización de sus cables
- GARANTÍA LIMITADA DE UN AÑO
16
BE-MSFM
www.bestbuy.com/bestbuyessentials
2 Drill three pilot holes through the template to a depth of 2.8 in. (70 mm) using a
3/8 in. (10 mm) diameter masonry drill bit, then remove the template.
3 Insert the concrete wall anchors (B2) into the pilot holes and use a hammer to
make sure that the anchors are flush with the concrete surface.
4 Place the magnetic level on top of the wall plate, then align the wall plate with the
anchors, insert the lag bolts (B1) through the lag bolt washers (B3) and through the
holes in the wall plate. Make sure that the wall plate is level then tighten the lag
bolts only until they are firm against the wall plate.
Important: Make sure that you drill into the center of the studs.
CAUTION: Avoid potential injuries or property damage! DO NOT over-tighten the lag
bolts (B1).
Concrete wall
2.8 in. (70 mm)
3/8 in. (10 mm)
Magnetic level
* Minimum solid concrete thickness = 8 in. (20.3 cm)
* Minimum concrete block size: 8 x 8 x 16 in. (20.3 x 20.3 x 40.6 cm)