Quick Start Guide

Package contents
• 10 W Qi Certied Wireless Charging Pad
• 4 ft. (1.2 m) charging cable
• Quick Setup Guide
Compatibility
Any Qi-enabled devices up to 10 W, including smartphones,
headphones, and smart watches. This includes the latest iPhone,
Samsung Galaxy, and Note devices.
2 Plug the other end of the cable into a USB port on a computer
or into a power adapter. See “Choosing the right USB power
adapter” for power requirements.
Choosing the right USB power adapter
• A Quick Charge (QC) 2.0 or QC 3.0 charger is required to obtain
the full 10 W of wireless charging performance.
• A minimum of a 5 V/2 A (10 watts) USB charger or powered USB
port is required to obtain 5 W of wireless charging performance.
• Using low-power USB ports (with less than 5 V/2 A of power
output) could cause poor performance or cause the wireless
charger to not work.
3 Place your Qi-enabled device on the center of your charging
pad with the screen facing up. The LED is blue/purple when
your device is charging.
Note: If the LED is red, your device is not charging.
See “TROUBLESHOOTING” for more information
.
LED
Pulsing blue
Solid blue
Solid purple
Solid red
Blinking red
STATUS
Standby
Charging
Quick charging
Insucient input power
Charging error
Before using your new product, please read these instructions to prevent any damage.
10-Watt Wireless
Charging Pad
Quick Setup Guide
BE-MQP10W22K /
BE-MQP10W22K-C
LED indicator
Features
• Compatible with Apple, Samsung, and other Qi-compatible devices
• Charges devices wirelessly with a 10 W max output
• Shows your device is positioned correctly with an LED indicator
• Keeps your charger and device in place with non-slip rubber pads
• Includes a micro USB cable to plug into your existing power
adapter or computer
• Built and backed by Best Buy
Product overview
LED indicator status
Using your charging pad
1 Connect the charging cable to your charging pad.
Charging cable
USB power adapter
Micro USB port