User Manual

Large Tilt Mount for 47–84" TVs

www.bestbuy.com/bestbuyessentials

STEP 2 - Select screws, washers, and spacers

1 Select the hardware for your TV (screws, washers, and spacers). If your TV came

with mounting hardware, the screws are usually in the holes on the back of the TV.

If you don’t know the length of the mounting screws you need, hand-thread

different screws to find the correct length.

A Select one of the following types of screws:

B If you use M4, M5, or M6 screws, select the M6 washer (N), or if you use M8

screws, select the M8 washer (O).

C If the TV has an irregular or obstructed TV back, also use the spacers (P).

4 Remove the screws.

5 For a flat back TV, go to “STEP 3 - Option 1: Attaching the mounting hardware to

TVs with a flat back“ on page 8.

-OR-

For an irregular or obstructed back, go to “STEP 3 - Option 2: Attaching the

mounting hardware to TVs with irregular or obstructed backs” on page 9.

Flat back Obstructed back

M4 × 12 mm screws (D) M4 × 30 mm screws (E)

M5 × 12 mm screws (F) M5 × 30 mm screws (G)

M6 × 12 mm screws (H) M6 × 20 mm screws (I)

M8 × 12 mm screws (K) M6 × 35 mm screws (J)

M8 × 35 mm screws (L)

M8 × 50 mm screws (M)

CAUTION: Make sure that the screws (and spacers, if used) are the correct length.

If the screw or screw/spacer combination is too long, it may damage the TV. If the

screw or screw/spacer combination is too short, the TV may fall from the mount

and damage the TV or injure someone. If you encounter resistance when testing screws,

stop immediately and try another combination. If none of the screws or screw/spacer

combinations work, contact customer service.

Screw is

too long

Screw fits

correctly

Screw is

too short