User Manual

14
www.bestbuy.com/bestbuyessentials
BE-MLTILT
4 Align the plate with the anchors, insert the lag bolts (A) through the lag bolt
washers (B), then through the holes in the wall mount. Make sure that the wall
mount is level. Tighten the lag bolts with a socket wrench only until they are firm
against the wall mount.
Notes:
• Minimum solid concrete thickness: 8 in. (203 mm)
• Minimum concrete block size: 8 × 8 × 16 in. (203 × 203 × 406 mm)
• Minimum horizontal spacing between fasteners cannot be less than 16 in. (406 mm).
You’ll need
Concrete wall
Socket wrench with 7/16"
(11 mm) socket or adjustable wrench
Drill
3/8" (10 mm) masonry drill bit
A Wall mount
C Wall Mount Template
B
Lag bolt washers (4)
A
Lag bolts (4)
Hammer
C
Concrete anchors (4)
Tape
Level