User Manual

13
Large Tilt Mount for 47–84" TVs
www.bestbuy.com/bestbuyessentials
STEP 5 - Option 2: Installing on a solid concrete or concrete
block wall
1 Align the center of the wall mount template at the height (a+b) you determined in
the previous step, make sure that it is level, then tape it to the wall.
2 Drill two pilot holes through the template to a depth of 2.75 in. (70 mm) using a
3/8 in. (10 mm) diameter masonry drill bit, then remove the template.
3 Insert the concrete wall anchors (C) into the pilot holes and use a hammer to make
sure that the anchors are flush with the concrete surface.
CAUTION: To prevent property damage or personal injury, never drill into mortar
between blocks. Mount the wall mount directly onto the concrete surface.