User Manual
Table Of Contents
- Contents/Contenido
- ENGLISH
- SAFETY INFORMATION INSTRUCTIONS
- Features
- Tools needed
- Package contents
- Installation instructions
- STEP 1- Determine whether your TV has a flat, irregular, or obstructed back
- STEP 2 - Select screws, washers, and spacers
- STEP 3 - Attach the plastic covers to the wall plate
- STEP 4 - Option 1: Attach hardware to a flat back TV
- STEP 4 - Option 2: Attach hardware to an irregular or obstructed back TV
- STEP 5 - Determine wall-mount location
- STEP 6 - Option 1: Install on a wood stud wall
- STEP 6 - Option 2: Install on a solid concrete or concrete block wall
- STEP 7 - Mount your TV to the wall plate
- If you ever need to remove your TV from the wall plate
- ONE-YEAR LIMITED WARRANTY
- ESPAÑOL
- INSTRUCCIONES DE SEGURIDAD IMPORTANTES
- Características
- Herramientas requeridas
- Contenido del paquete
- Instrucciones de instalación
- PASO 1 - Determine si su televisor tiene una parte posterior plana, irregular u obstruida.
- PASO 2 - Selección de los tornillos, arandelas y espaciadores
- PASO 3- Sujetado de las cubiertas de plástico a la placa para pared
- Paso 4 - Opción 1: Fije los accesorios a un televisor con parte posterior plana
- Paso 4 - Opción 2: Fijación de los accesorios a un televisor con parte posterior irregular u obstruida
- PASO 5: Determine la ubicación del montaje en pared
- PASO 6 - Opción 1: Instale en una pared con viga de madera
- PASO 6 - Opción 2: Instalación en una pared de concreto sólido o de bloques de concreto
- PASO 7 - Fijación del televisor a la placa para pared
- Si alguna vez necesita quitar su televisor de la placa para pared
- GARANTÍA LIMITADA DE UN AÑO
19
Large Fixed Mount for 37 to 90” TVs
www.bestbuy.com/bestbuyessentials
3
Insert the concrete wall anchors (Q) into the pilot holes and use a hammer to make
sure the anchors are flush with the concrete surface.
4 Align the wall plate (A) with the anchors, insert the lag bolts (P) through the lag
bolt washers (O), then through the holes in the wall plate. Tighten the lag bolts only
until they are firm against the wall plate.
CAUTION: Avoid potential injuries or property damage! DO NOT over-tighten the lag
bolts (P).
Concrete wall
Level