User Manual
Table Of Contents
- Contents/Contenido
- ENGLISH
- SAFETY INFORMATION INSTRUCTIONS
- Features
- Tools needed
- Package contents
- Installation instructions
- STEP 1- Determine whether your TV has a flat, irregular, or obstructed back
- STEP 2 - Select screws, washers, and spacers
- STEP 3 - Attach the plastic covers to the wall plate
- STEP 4 - Option 1: Attach hardware to a flat back TV
- STEP 4 - Option 2: Attach hardware to an irregular or obstructed back TV
- STEP 5 - Determine wall-mount location
- STEP 6 - Option 1: Install on a wood stud wall
- STEP 6 - Option 2: Install on a solid concrete or concrete block wall
- STEP 7 - Mount your TV to the wall plate
- If you ever need to remove your TV from the wall plate
- ONE-YEAR LIMITED WARRANTY
- ESPAÑOL
- INSTRUCCIONES DE SEGURIDAD IMPORTANTES
- Características
- Herramientas requeridas
- Contenido del paquete
- Instrucciones de instalación
- PASO 1 - Determine si su televisor tiene una parte posterior plana, irregular u obstruida.
- PASO 2 - Selección de los tornillos, arandelas y espaciadores
- PASO 3- Sujetado de las cubiertas de plástico a la placa para pared
- Paso 4 - Opción 1: Fije los accesorios a un televisor con parte posterior plana
- Paso 4 - Opción 2: Fijación de los accesorios a un televisor con parte posterior irregular u obstruida
- PASO 5: Determine la ubicación del montaje en pared
- PASO 6 - Opción 1: Instale en una pared con viga de madera
- PASO 6 - Opción 2: Instalación en una pared de concreto sólido o de bloques de concreto
- PASO 7 - Fijación del televisor a la placa para pared
- Si alguna vez necesita quitar su televisor de la placa para pared
- GARANTÍA LIMITADA DE UN AÑO
13
Large Fixed Mount for 37 to 90” TVs
www.bestbuy.com/bestbuyessentials
3
If you are using M4 washers (G), place them between the spacers and TV brackets
and over the holes in the TV brackets. If you are using M6/M8 washers (H), place
them over the holes in the TV brackets. Insert screws (F, K, or N) through the
washers, TV brackets, and spacers.
4 Tighten the screws until they are snug against the TV brackets. Do not over tighten.
or
or
If you are using M4 (G) washers (only),
place them both in front of and behind
the brackets.