User Manual
Table Of Contents
- Contents
- ENGLISH
- IMPORTANT SAFETY INSTRUCTIONS
- Features
- Tools needed
- Package contents
- Installation instructions
- STEP 1 - Determine whether your TV has a flat back or an irregular or obstructed back
- STEP 2 - Select screws, washers, and spacers
- STEP 3 - Option 1: Attach the mounting hardware to a TV with a flat back
- STEP 3 - Option 2: Attach the mounting hardware to a TV with an irregular or obstructed back
- STEP 4 - Determine the wall-mount location
- STEP 5 - Option 1: Install on a wood stud* wall
- STEP 5 - Option 2: Install on a solid concrete or concrete block wall
- STEP 6 - Secure your TV to the wall plate
- STEP 7 - Manage cables
- STEP 8 - Adjust the mount arm and tilt angles
- ONE-YEAR LIMITED WARRANTY
- ESPAÑOL
- INSTRUCCIONES IMPORTANTES DE SEGURIDAD
- Características
- Herramientas requeridas
- Contenido del paquete
- Instrucciones de instalación
- PASO 1 - Determine si su televisor tiene una parte posterior plana, irregular u obstruida
- PASO 2 - Selección de los tornillos, arandelas y espaciadores
- PASO 3 - Opción 1: Instalación de la ferretería de montaje para televisor con una parte posterior plana
- PASO 3 - Opción 2: Instalación de la tornillería de montaje en un televisor con la parte posterior irregular u obstruida
- PASO 4 - Determine la ubicación del montaje en pared
- PASO 5 - Opción 1: Instalación en una pared con viga de madera*
- PASO 5 - Opción 2: Instalación en una pared de concreto sólido o de bloques de concreto
- PASO 6 - Fije el televisor a la placa para pared
- PASO 7 - Organización de los cables
- PASO 8 - Ajuste el brazo de montaje y los ángulos de inclinación
- GARANTÍA LIMITADA DE UN AÑO
9
Large Full Motion Mount for 47" - 84" TVs / Soporte grande de movimiento completo para televisores de 47 a 84 pulg.
www.bestbuy.com/bestbuyessentials
STEP 3 - Option 2: Attach the mounting hardware to a TV with an irregular or obstructed back
You’ll need
1 Place spacers (A11) over the holes on the back of your TV.
2 Align the left and right TV brackets with the screw holes on the back of your TV. Make sure that the brackets are level.
3 Place washers (A12 or A13) over the holes in the TV brackets. Insert screws (A2, A4, A6, A7, A9, or A10) through the
washers, TV brackets, and spacers and into the screw holes on the back of your TV.
4 Tighten the screws until they are snug against the TV brackets. Do not over tighten.
A2 (4)
A4 (4)
Phillips screwdriver
Screws
A7 (4)
OR
A11 (4)
OR
Spacers
TV brackets (2)
A6 (4)
OR
OR
Washers
A12 (4)
A13 (4)
OR
Magnetic removable
bubble level
A10 (4)
OR
A9 (4)
OR
OR
A12 or
A13
A2/A4 or
A6/A7 or
A9/A10
TV brackets
A11