User Manual
Table Of Contents
- Contents
- ENGLISH
- IMPORTANT SAFETY INSTRUCTIONS
- Features
- Tools needed
- Package contents
- Installation instructions
- STEP 1 - Determine whether your TV has a flat back or an irregular or obstructed back
- STEP 2 - Select screws, washers, and spacers
- STEP 3 - Option 1: Attach the mounting hardware to a TV with a flat back
- STEP 3 - Option 2: Attach the mounting hardware to a TV with an irregular or obstructed back
- STEP 4 - Determine the wall-mount location
- STEP 5 - Option 1: Install on a wood stud* wall
- STEP 5 - Option 2: Install on a solid concrete or concrete block wall
- STEP 6 - Secure your TV to the wall plate
- STEP 7 - Manage cables
- STEP 8 - Adjust the mount arm and tilt angles
- ONE-YEAR LIMITED WARRANTY
- ESPAÑOL
- INSTRUCCIONES IMPORTANTES DE SEGURIDAD
- Características
- Herramientas requeridas
- Contenido del paquete
- Instrucciones de instalación
- PASO 1 - Determine si su televisor tiene una parte posterior plana, irregular u obstruida
- PASO 2 - Selección de los tornillos, arandelas y espaciadores
- PASO 3 - Opción 1: Instalación de la ferretería de montaje para televisor con una parte posterior plana
- PASO 3 - Opción 2: Instalación de la tornillería de montaje en un televisor con la parte posterior irregular u obstruida
- PASO 4 - Determine la ubicación del montaje en pared
- PASO 5 - Opción 1: Instalación en una pared con viga de madera*
- PASO 5 - Opción 2: Instalación en una pared de concreto sólido o de bloques de concreto
- PASO 6 - Fije el televisor a la placa para pared
- PASO 7 - Organización de los cables
- PASO 8 - Ajuste el brazo de montaje y los ángulos de inclinación
- GARANTÍA LIMITADA DE UN AÑO
7
Large Full Motion Mount for 47" - 84" TVs / Soporte grande de movimiento completo para televisores de 47 a 84 pulg.
www.bestbuy.com/bestbuyessentials
STEP 2 - Select screws, washers, and spacers
1 Select the hardware for your TV (screws, washers, and spacers). A limited number of TVs come with mounting hardware
included. (If there are screws that came with your TV, they are almost always in the holes on the back of your TV.) If you
don't know the correct length of the mounting screws your TV requires, test various sizes by hand-threading the
screws.
Select one of the following types of screws:
For a TV with a flat back:
• M4 X 12 mm screws (A1)
• M5 X 12 mm screws (A3)
• M6 X 12 mm screws (A5)
• M8 X 16 mm screws (A8)
For a TV with an irregular/obstructed back:
• M4 X 30 mm screws (A2)
• M5 X 30 mm screws (A4)
• M6 X 20 mm screws (A6)
• M6 X 35 mm screws (A7)
• M8 X 25 mm screws (A9)
• M8 X 50 mm screws (A10)
If you use M4 or M5 screws, select the M4/M5 washer (A12) or if you use M6 or M8 screws, select the
M6/M8 washer (A13). For an irregular or obstructed TV back, also use the spacers (A11).
2 Remove the screws from the holes in the back of your TV.
3 For a flat back TV, go to STEP 3 - Option 1: Attach the mounting hardware to a TV with a flat back
on page 8.
-OR-
For an irregular or obstructed back, go to STEP 3 - Option 2: Attach the mounting hardware to a TV with an irregular or
obstructed back on page 9.
CAUTION: To avoid potential personal injuries and property damage, make sure that there are adequate threads to secure the
brackets to your TV. If you encounter resistance, stop immediately and contact customer service. Use the shortest screw and spacer
combination to accommodate your TV. Using hardware that is too long may damage your TV. However, using a screw that is too short
may cause your TV to fall from the mount.
Screw is
too long
Screw fits
correctly
Screw is
too short