User Manual
Table Of Contents
- Contents
- ENGLISH
- IMPORTANT SAFETY INSTRUCTIONS
- Features
- Tools needed
- Package contents
- Installation instructions
- STEP 1 - Determine whether your TV has a flat back or an irregular or obstructed back
- STEP 2 - Select screws, washers, and spacers
- STEP 3 - Option 1: Attach the mounting hardware to a TV with a flat back
- STEP 3 - Option 2: Attach the mounting hardware to a TV with an irregular or obstructed back
- STEP 4 - Determine the wall-mount location
- STEP 5 - Option 1: Install on a wood stud* wall
- STEP 5 - Option 2: Install on a solid concrete or concrete block wall
- STEP 6 - Secure your TV to the wall plate
- STEP 7 - Manage cables
- STEP 8 - Adjust the mount arm and tilt angles
- ONE-YEAR LIMITED WARRANTY
- ESPAÑOL
- INSTRUCCIONES IMPORTANTES DE SEGURIDAD
- Características
- Herramientas requeridas
- Contenido del paquete
- Instrucciones de instalación
- PASO 1 - Determine si su televisor tiene una parte posterior plana, irregular u obstruida
- PASO 2 - Selección de los tornillos, arandelas y espaciadores
- PASO 3 - Opción 1: Instalación de la ferretería de montaje para televisor con una parte posterior plana
- PASO 3 - Opción 2: Instalación de la tornillería de montaje en un televisor con la parte posterior irregular u obstruida
- PASO 4 - Determine la ubicación del montaje en pared
- PASO 5 - Opción 1: Instalación en una pared con viga de madera*
- PASO 5 - Opción 2: Instalación en una pared de concreto sólido o de bloques de concreto
- PASO 6 - Fije el televisor a la placa para pared
- PASO 7 - Organización de los cables
- PASO 8 - Ajuste el brazo de montaje y los ángulos de inclinación
- GARANTÍA LIMITADA DE UN AÑO
17
Large Full Motion Mount for 47" - 84" TVs / Soporte grande de movimiento completo para televisores de 47 a 84 pulg.
www.bestbuy.com/bestbuyessentials
STEP 8 - Adjust the mount arm and tilt angles
You’ll need
1 To adjust the arms’ tension (to make the arm easier or harder to move), loosen or tighten the tension screws with an
Allen wrench.
2 To rotate your TV left or right, hold the sides of your TV, then push one side while pulling the other side.
3 To tilt of your TV up or down, hold the top and bottom of your TV, then tilt your TV forward or backward.
4 If the TV screen sags, tighten the two bolts (shown below) on the TV plate with a socket wrench until they are snug.
Allen wrench
Socket wrench
Allen wrench
Tension screw
Tension
screw
-8° ~ 12°
45°
TV