User Manual
Table Of Contents
- Contents
- ENGLISH
- IMPORTANT SAFETY INSTRUCTIONS
- Features
- Tools needed
- Package contents
- Installation instructions
- STEP 1 - Determine whether your TV has a flat back or an irregular or obstructed back
- STEP 2 - Select screws, washers, and spacers
- STEP 3 - Option 1: Attach the mounting hardware to a TV with a flat back
- STEP 3 - Option 2: Attach the mounting hardware to a TV with an irregular or obstructed back
- STEP 4 - Determine the wall-mount location
- STEP 5 - Option 1: Install on a wood stud* wall
- STEP 5 - Option 2: Install on a solid concrete or concrete block wall
- STEP 6 - Secure your TV to the wall plate
- STEP 7 - Manage cables
- STEP 8 - Adjust the mount arm and tilt angles
- ONE-YEAR LIMITED WARRANTY
- ESPAÑOL
- INSTRUCCIONES IMPORTANTES DE SEGURIDAD
- Características
- Herramientas requeridas
- Contenido del paquete
- Instrucciones de instalación
- PASO 1 - Determine si su televisor tiene una parte posterior plana, irregular u obstruida
- PASO 2 - Selección de los tornillos, arandelas y espaciadores
- PASO 3 - Opción 1: Instalación de la ferretería de montaje para televisor con una parte posterior plana
- PASO 3 - Opción 2: Instalación de la tornillería de montaje en un televisor con la parte posterior irregular u obstruida
- PASO 4 - Determine la ubicación del montaje en pared
- PASO 5 - Opción 1: Instalación en una pared con viga de madera*
- PASO 5 - Opción 2: Instalación en una pared de concreto sólido o de bloques de concreto
- PASO 6 - Fije el televisor a la placa para pared
- PASO 7 - Organización de los cables
- PASO 8 - Ajuste el brazo de montaje y los ángulos de inclinación
- GARANTÍA LIMITADA DE UN AÑO
12
BE-MLFM
www.bestbuy.com/bestbuyessentials
4 Align the wall plate on the wall mount with the pilot holes, insert the lag bolts (B1) through the lag bolt washers (B3),
then through the holes in the wall plate. Make sure that the wall plate is level. Tighten the lag bolts with a socket
wrench only until they are firm against the wall plate.
CAUTION: DO NOT over-tighten the lag bolts (B1).
B3
B1
Wood stud
Magnetic removable
bubble level