User Manual
Table Of Contents
- Contents
- ENGLISH
- IMPORTANT SAFETY INSTRUCTIONS
- Features
- Tools needed
- Package contents
- Installation instructions
- STEP 1 - Determine whether your TV has a flat back or an irregular or obstructed back
- STEP 2 - Select screws, washers, and spacers
- STEP 3 - Attach the mounting hardware to a TV
- STEP 4 - Determine the wall-mount location
- STEP 5 - Option 1: Install on a wood stud wall
- STEP 5 - Option 2: Install on a solid concrete or concrete block wall
- STEP 5 - Option 3: Install on a steel stud wall
- STEP 6 - Securing your TV to the wall plate
- Managing cables
- Adjusting the position of your TV
- Removing your TV from the wall plate
- ONE-YEAR LIMITED WARRANTY
- ESPAÑOL
- INSTRUCCIONES IMPORTANTES DE SEGURIDAD
- Características
- Herramientas requeridas
- Contenido del paquete
- Instrucciones de instalación
- PASO 1 - Determine si su televisor tiene una parte posterior plana, irregular u obstruida
- PASO 2 - Selección de los tornillos, arandelas y espaciadores
- PASO 3 - Como fijar la ferretería de montaje a un televisor
- PASO 4 - Determine la ubicación del montaje en pared
- PASO 5: Opción 1: Instale en una pared con viga de madera
- PASO 5: Opción 2: Instalación en una pared de concreto sólido o de bloques de concreto
- PASO 5 - Opción 3: Instalación en una pared con vigas de acero
- PASO 6 - Fijación del televisor a la placa para pared
- Organización de cables
- Ajuste de la posición de su televisor
- Cómo quitar el televisor de la placa de pared
- GARANTÍA LIMITADA DE UN AÑO
18
BE-MLET
www.bestbuy.com/bestbuyessentials
2 Drill four pilot holes through the template to a depth of 1 in. (25 mm) using a 1/2 in. (13 mm) diameter masonry drill bit,
then remove the template.
3 Pivot the toggle at the end of the steel stud anchor to align it, so that it can be inserted into the holes you drilled, insert
the steel stud anchors into the pilot holes (A), then align the finger grips at the end of the steel stud anchor to open the
toggle inside the wall (B).
Note: After mounting, your TV will shift 2.28 in. (58 mm) to the right when the TV mount is extended. You can fine tune the wall plate
and TV mount to compensate.
1 in.
(25 mm)
1/2 in. (13 mm)
A
B
3