User Manual
Table Of Contents
- Contents
- ENGLISH
- IMPORTANT SAFETY INSTRUCTIONS
- Features
- Tools needed
- Package contents
- Installation instructions
- STEP 1 - Determine whether your TV has a flat back or an irregular or obstructed back
- STEP 2 - Select screws, washers, and spacers
- STEP 3 - Attach the mounting hardware to a TV
- STEP 4 - Determine the wall-mount location
- STEP 5 - Option 1: Install on a wood stud wall
- STEP 5 - Option 2: Install on a solid concrete or concrete block wall
- STEP 5 - Option 3: Install on a steel stud wall
- STEP 6 - Securing your TV to the wall plate
- Managing cables
- Adjusting the position of your TV
- Removing your TV from the wall plate
- ONE-YEAR LIMITED WARRANTY
- ESPAÑOL
- INSTRUCCIONES IMPORTANTES DE SEGURIDAD
- Características
- Herramientas requeridas
- Contenido del paquete
- Instrucciones de instalación
- PASO 1 - Determine si su televisor tiene una parte posterior plana, irregular u obstruida
- PASO 2 - Selección de los tornillos, arandelas y espaciadores
- PASO 3 - Como fijar la ferretería de montaje a un televisor
- PASO 4 - Determine la ubicación del montaje en pared
- PASO 5: Opción 1: Instale en una pared con viga de madera
- PASO 5: Opción 2: Instalación en una pared de concreto sólido o de bloques de concreto
- PASO 5 - Opción 3: Instalación en una pared con vigas de acero
- PASO 6 - Fijación del televisor a la placa para pared
- Organización de cables
- Ajuste de la posición de su televisor
- Cómo quitar el televisor de la placa de pared
- GARANTÍA LIMITADA DE UN AÑO
14
BE-MLET
www.bestbuy.com/bestbuyessentials
STEP 5 - Option 2: Install on a solid concrete or concrete block wall
You’ll need
1 Align the center of the wall plate template at the height (a + b) you determined in the previous step, make sure that it is
level, then tape it to the wall.
Note: Concrete wall installation kit not included. See Package contents on page 5 for information about how to recieve this kit free of
charge.
CAUTIONS:
• To prevent property damage or personal injury, never drill into the mortar between blocks.
• Mount the wall plate directly onto the concrete surface (no wall covering).
• Minimum concrete block size: 8 x 8 x 16 in. (203 x 203 x 406 mm).
• Minimum horizontal space between fasteners: 16 in (406 mm).
3/8 in.
masonry drill
bit
Hammer
Socket wrench
Drill
Edge-to edge
stud finder
Tape
5/16 x 2-3/4 in.
Lag bolt (4)
Level
Pencil
Wall plate template
Lag bolt washer (4)
Concrete anchor (4)
Wall plate
Awl
Minimum 16 in.
(406 mm)