User Manual
Table Of Contents
- Contents
- ENGLISH
- IMPORTANT SAFETY INSTRUCTIONS
- Features
- Tools needed
- Package contents
- Installation instructions
- STEP 1 - Determine whether your TV has a flat back or an irregular or obstructed back
- STEP 2 - Select screws, washers, and spacers
- STEP 3 - Attach the mounting hardware to a TV
- STEP 4 - Determine the wall-mount location
- STEP 5 - Option 1: Install on a wood stud wall
- STEP 5 - Option 2: Install on a solid concrete or concrete block wall
- STEP 5 - Option 3: Install on a steel stud wall
- STEP 6 - Securing your TV to the wall plate
- Managing cables
- Adjusting the position of your TV
- Removing your TV from the wall plate
- ONE-YEAR LIMITED WARRANTY
- ESPAÑOL
- INSTRUCCIONES IMPORTANTES DE SEGURIDAD
- Características
- Herramientas requeridas
- Contenido del paquete
- Instrucciones de instalación
- PASO 1 - Determine si su televisor tiene una parte posterior plana, irregular u obstruida
- PASO 2 - Selección de los tornillos, arandelas y espaciadores
- PASO 3 - Como fijar la ferretería de montaje a un televisor
- PASO 4 - Determine la ubicación del montaje en pared
- PASO 5: Opción 1: Instale en una pared con viga de madera
- PASO 5: Opción 2: Instalación en una pared de concreto sólido o de bloques de concreto
- PASO 5 - Opción 3: Instalación en una pared con vigas de acero
- PASO 6 - Fijación del televisor a la placa para pared
- Organización de cables
- Ajuste de la posición de su televisor
- Cómo quitar el televisor de la placa de pared
- GARANTÍA LIMITADA DE UN AÑO
11
Large Extended Tilt Mount for 32"-70" TVs/Montaje con inclinación extendido grande para televisores de 32 a 70 pulg.
www.bestbuy.com/bestbuyessentials
STEP 5 - Option 1: Install on a wood stud wall
You’ll need
1 Locate and verify the centers of the studs with an edge-to-edge stud finder, then mark the centers with an awl.
CAUTIONS:
• Drywall thickness must not exceed 5/8 in. (16 mm).
• Minimum wood stud size is 2 x 4 in. (51 x 102 mm) nominal or 1-1/2 x 3-1/2 in. (38 x 89 mm) actual.
• Minimum horizontal space between fasteners is 16 in. (406 mm).
• Stud center must be verified.
Edge-to edge
stud finder
Drill
7/32 in. wood
drill bit
Wall plate template
Tape
lag bolt
washer
Wall plate
1/2 in. Socket wrench
Lag bolt
Level
Awl
Pencil
Maximum 5/8 in
(16 mm)
Minimum 16 in.
(406 mm)