Specification

division of Reynolds Building Systems, Inc. 205 Arlington Drive, Greenville, PA 16125
Before you order our kit or begin construction, obtain
a building permit. If additional documents are required
contact [e-mail].
Foundation: By owner
Wall Framing: Constructed from 2x4 pre-
cut wall studs spaced 24" on center between
top and bottom plates.
Siding: Louisianna-Pacific 'Smart Panel'
primed 8" o.c. groove with 50 year warranty,
5 year labor replacement. Siding is pre-cut for
fast and accurate field assembly.
Roof System: 2x4 trusses spaced 24" on center,
covered with pre-cut 7/16" OSB roof sheathing.
Shingles by owner.
Exterior Trim: White pine trim for corners,
door and gable trim. Doors are pre-built
Hardware: Nails for all framing and door hard-
ware included. Windows are optional and extra.
12'x10' .........12'-0" long x 10'-0" deep
16'x10' .........16'-0" long x 10'-0" deep
Foundation Size
If necessary use bricks, patio stones or similar material to
level or provide additional support to the floor. If your ground
has low areas consider adding gravel and or 4x4 treated
timbers to rest the floor on.
!
Leveling Blocks
!
Elm Elevation
Optional Floor: is constructed with treated 2x4
framing. Floor joists are spaced 16" on center and
covered with 5/8" OSB (oriented strand board).
2x4 Treated Joist 16" o.c.