Installation Instructions

Step 12 Install Doors
Install Door
Latch
Left
Door
1x4 Gable Trim
2. Before you fasten the hinges to the door trim, temporarily prop the doors in the opening.
Leave a space between the doors and the side trim to allow room for the doors to expand
when they absorb moisture.
If your door opening is out of square, the space around the doors will not be even. You can
remove and reposition the side trim to make allowances for this. The side trim does not
have to be flush with the frame of the door opening. You can move the trim in or out to
make the door spacing equal. Adjust trim, if necessary, and then secure with 8d galv. nails.
Secure hinges to the door trim with 2" long screws.
3. Install door latch.
1. Install 1x4 gable trim on the 2x3s at the front and back of the building.