Installation & Assembly

A
A
B
B
X
X
X
X
X
X
LAP Edge
Step 5 Assemble Sidewalls
68-1/2" Wall Plate
19-3/4"
23-1/4"
65-1/2" Wall Plate
3. Square wall frame. Angle measurement is 153-1/2" when squared. Install (2) two full width
siding panels. Install the first siding panel with the 'LAP' edge extending 3-1/2" past the end
of the wall frame. Insure siding extends 3/4" below the bottom plate. Siding will extend above
top plate.
4. Install a 45" wide siding panel last. The panel will extend 3-1/2" past the wall frame.
Siding Extends 3/4" Below Plate
LAP Edge
LAP Edge
1. Position 68-1/2" and 65-1/2" 2x4 boards together and indicate with 'X' marks, where the
wall studs will be located. Mark the ends that will butt together with the letters 'A' and 'B'.
72" Wall Studs
5. Repeat steps to assemble another sidewall panel.
2. Install 72" wall studs between the top and bottom plates. Assemble wall frames with 10d
sinkers. Nail both wall frames together.
A
B
X
X
X
X
X
X
Tip: Use a 3/4" trim board as a gauge.
24"
24"