Installation & Assembly

1. Using measurements in
illustration below install
(4) four 2x4-72" wall studs
between (2) two 2x4-8'
plates with 10d sinkers.
2. Square wall frame.
2x4-8' Bottom Plate
4. Install a 2x3 board, with siding attached, at
the top of the wall frame.
5. Install another 23-3/4" wide siding with ‘lap’
edge flush with door opening and cut edge
flush with top plate.
Top Plate
Siding Flush
2x4-8' Top Plate
Step 4 Assemble Frontwall
3. Install a 23-3/4" x 75-3/4" wall siding with 'tongue' edge flush with the door opening
and cut edges flush with end stud and top plate.
23-3/4"
23-3/4"
48-1/2"
Door Opening
2x3 Board
with Siding
Cut Edge Flush
'LAP'