Installation & Assembly

2. Install 72" wall studs between the top and bottom plates. Secure studs with 10d sinkers,
use two (2) nails at each stud end.
Step 3 Assemble Back Wall
2x4-6' Wall Studs
8' Bottom Plate
3. Square wall frame. Measure diagonally (corner to corner). The measurements will be the
same when the wall is square.
4. Locate (2) two 48" x 75-3/4" siding panels. Install the first panel with the 'LAP' edge flush
with the end and cut edge flush with top of the wall frame. Install siding with 8d galv.
nails. Space nails 12" apart.
5. Install the second siding panel.
Siding Extends Below Plate
LAP Edge
1. Gather (2) two 2x4-8' boards. Layout boards for wall stud spacing. Indicate with 'X'
marks where the wall studs will be placed.
X
X
X
X
X
X
2x4 - 8'
Wall Plates
X
X
8' Top Plate
23-1/4"
24"
24"
LAP Edge