Owners manual

2. Install 72" long wall studs
between the wall plates.
2. Repeat to apply siding to the other 10' sidewall frame.
Step 6 Assemble The Left Sidewall
6' Wall Plate
1. Butt a 10' wall frame against a 6' panel assembled in Step 5. Install a siding panel but do
not nail along the long edge that overlaps the sided frame. You can nail this edge after the
wall panels are installed. This will enable you to separate the wall panels making them easier
to handle. Install another full width siding panel. Install the 24" siding as the last panel.
72" Bottom Plate
with Saw Cut
F
F
72" Bottom Plate
Do Not Nail Along This Edge
Step 5B Assemble 10' Long Sidewall Panels
1. Position (2) two 2x4-48" boards and (2) two 2x4-72" boards together and indicate with 'X'
marks, where the wall studs will be located.
X
X
X
X
X
X
X
X
24"
23-1/4"
72" Wall Plate
X
X
X
X
X
X
48" Wall Plate
23-1/4"
48" Wall Plate
3. Screw both wall frames together. For additional strength add 10d sinkers.
4. Repeat above steps to assemble another 10' sidewall frame.