Owners manual

F
F
F
B
Step 6A Apply Siding to The Right Sidewall
1. Nail one of the front sidewall frames together with a back sidewall frame.
See drawing below. Nail the frames together with 10d sinkers.
2. Install the first siding panel with the LAP edge flush with the wall stud. The
siding should extend 3/4" below the bottom plate. Tip: Use a 1x3 trim board
as a gauge.
Assemble the other sidewall frames. Important:
Assemble the walls so the wall frames marked with
the letter 'F' and 'B' are positioned as shown below.
B
Step 6B Apply Siding to The Left Sidewall
LAP Edge
3. Install (2) two more siding panels. If your are building
a 10x12 building, cut the last siding panel flush with
the end of the wall frame.
Siding Extends 3/4" Below Plate