Owners manual

Air
Space
Truss
Shingles
1x6 Fascia
Felt
Paper
1x3 Gable Trim
2. Install shingles according to the instructions on the wrapper. If you need more detailed
instructions on installing shingles, there are good publications at book stores or newsstands.
Building Tip: Install a ridge vent in lieu of shingle caps. Ridge vent provides ideal ventilation,
preventing heat or moisture from damaging your building or its contents.
Optional ridge vent provides
ideal ventilation.
Step 20 Install Roofing — Not Supplied in Kit
1. Install metal roof edging perimeter of
the roof area. If you are not installing
shingles at this time, you can purchase
felt paper to protect the roof sheathing.
Install the felt paper before you install
the metal roof edge.
Step 19 Install Front Trim
1. Install (2) two pieces of 4" x 68-1/2" siding panels as door jamb trim
on each side of the door opening.
4" x 68-1/2" Door Jamb Trim
2. Cut 1x4-75-1/2" long trim boards
to length and install at the corners
on the sidewall, flush with the
siding on the front wall.
3. Install 1x3-76" trim boards, they
have an angle cut on one end, on
the front corners.
4.
Install 1x4 door trim on each side
of the door opening and the key-
stone and curved trim above the
door. The ends with the blue mark
butts the keystone.
5. Install 1x4-25" trim boards
between the corner trim and door
trim. Cut to length.
End With
Blue Mark