Owners manual

After you install the right door,
in Step 18, you can install the
opposite track.
Step 17 Install Sliding Door Track
3. Install a section of sliding door track under the track support boards. Install track flush
with the face of the track support. Use 1-1/4" screws, with washers, supplied in the kit.
2x3 Track Support
1. Install a 56-1/4" long track support assembly. Install the bottom of the 2x3 board at the
bottom of the gable plate. Use 2-1/2" screws. The 2x3 boards will butt against the side-
wall plates.
View From Inside
2. Install the other track support assembly.
2x4 Center Block
2x4 Gable Plate
2x4 Wall Plate