Owners manual

72-3/8" long 2x4
1x6 Fascia
6. Install 10" soffit panels
under the overhang.
Use 6d glav. nails.
10" Soffit Panels
72-3/8" long 2x4
Step 14 Install Gable Overhang & Trim
1. Install (2) two 72-3/8" long 2x4s on the front wall, under the roof sheathing. Use 10d sinkers.
2. Install two more 2x4s at the front edge of the roof sheathing. While a helper holds the 2x4
against the roof sheathing, screw the roof sheathing to the 2x4 with 1-5/8" long screws.
3. Cut the 1x6 fascia flush with the 2x4 gable overhang installed above.
4. Install 1x6 gable trim over the 2x4s. Install trim flush with the top of the roof sheathing.
5. Install 1x6 gable trim at the rear of the building.