Owners manual

Step 10 Install Treated Door Sill
1. Protect the edge of the floor by installing 60"long
x 3/4" flashing between the door opening.
60" Long Flashing
Treated Door Sill
3. Install the treated door sill between the door opening. There needs to be a space
between the treated sill and the inside wall. To position the sill, insert a 2-1/2"
screws between the treated sill and the inside wall. Drill 1/8" holes and screw sill
to the floor with 2-1/2" long screws. Remove the screw used as a spacer.
2-1/2" Wood Screw
Flashing
View From Inside
2. Bend a 3-1/2" x 5" metal flashing and
install at each corner of the door opening.