Specification

Before you order our kit or begin construction,
obtain a building permit. If additional documents
are required contact [e-mail].
12’ & 16’ Brookhaven Elevation
10’ - 10” Overall Building Height
6” - 4” Wall Height
10’ Building Depth 12’ or 16’ Building Width
Wall Framing: Constructed from 2x4 pre-cut
studs spaced 24” on center between 2x4 top,
bottom and tie plates.
Pocket Doors: Pre-built 2x4 frame covered with
LP ‘Smart Panel’ primed siding. White pine trim.
Door opening 55” wide x 72” high.
Siding: Luiisianna-Pacic ‘Smart Panel’ primed
8” o.c. groove with 50 year warranty, 5 year
labor replacement. Primed LP pre-cut horizontal
Lap siding furnished for gables.
Roof System: 2x4 trusses spaced 24” on center
(40 psf ground load, 140 mph wind load). 7/16”
OSB roof sheathing. Finished roof covering
(shingles or metal) by owner.
Exterior Trim: White pine trim for corners, door,
gable trim and front and sidewall fascia.
Hardware: Nails, hangers for trusses. Heavy duty
aluminum track for pocket doors, decorative door
handles, door latch and aluminum door sill.
Optional Floor: is constructed with treated 2x4
framing. Floor joists are spaced 16” on center and
covered with 5/8” OSB (oriented strand board).
10’x12’ .......... 10’-0” x 12’-0”
10’x16’ .......... 10’-0” x 16’-0”
Foundation Size
2x4 Treated Joist 16” o.c.
Leveling Blocks
If necessary use bricks, patio stones or similar material
to level or provide addtional support to the oor. If your
ground has low areas consider adding gravel and or 4x4
treated timbers to rest the oor on.
*
*
division of Reynolds Building Systems, Inc. 205 Arlington Drive, Greenville, PA 16125
Finished Roof Covering
by Owner