Installation Instructions

Step 10 Set Wall Panels
1. Set the back wall panel between the sidewalls. Secure wall panels together at the corners.
Use (4) four 10d coated nails per corner. Nail wall panels to the floor. Nail through the bottom
plate. Space 10d sinkers 24" apart.
2. Nail along the siding edge where the sidewall panels overlap.
3. Install the front wall frame between the sidewalls.
4. Use pre-cut wall studs at each side of the door opening to hold the front wall straight.
5. Install a pre-cut wall stud to brace the side walls where the wall panels meet.
89-1/2" Long Wall Panel
92-1/2" Long
Wall Panel
Nail Along
Siding Edge
Front Wall Frame
2x4 Wall
Brace
89-1/2" Long Wall Panel
92-1/2" Long
Wall Panel
6. Cut and remove the bottom 2x4 in the door opening.