Installation & Assembly

72" 2x4 Bottom Plate

2x4 Header

Support F

lush

with Plate

72" Long Wall Plates

If you want to locate the door on the left turn the

walls over before applying the siding.

4. Install a 30" x 76-3/4" siding panel. The siding will extend 3-1/2" beyond the left end

of the wall frame. The siding should extend 3/4" below the bottom plate and will extend

1" above the top plate. Install a full width x 76-3/4" siding panel on the right side of the

wall panel. This panel will be flush with header support.

30" Siding

Cut Edge

Siding Extends 3-1/2"

Beyond Wall Frame

3. Install (2) two 72" wall studs between (2) two 13-1/2 long 2x4s .

Step 3 Assemble Front Wall Frames

1. Position (2) two 72" long 2x4 boards together and

indicate where the wall studs will be located by

drawing lines and placing 'X' marks as shown.

2. Install (4) four 2x4-72" wall studs between the 2x4s from above. Use 10d sinkers.

24"

24-1/4"

4. Install a 72" long 2x4 at the end of each wall frame

flush with bottom of bottom plate. These will

support the door header installed later.

If you purchased optional windows

you can cut the opening now or later.

Refer to instructions in window box.

Extends 3/4" Below Plate