Installation & Assembly

LAP Edge

9. Position the other set of end wall frames on the floor. This time with

the frame with the angle corner on the left as shown.

10. Working from left to right install (2) two more

siding panels as done above. DO NOT

REMOVE WALL FRAME from floor.

LAP Edge

7 Install the siding panel with the angle cut with the 'LAP edge' flush with the end of the wall

with the siding extending 3/4" below the bottom plate. The siding will extend 1/2" above the

wall frame angled frame and 1" above top plate. Use 8d galv. nails spaced 12" apart.

8. Install a full width x 76-3/4" siding panel on the left. Siding will extend 3/4" below bottom

plate andl extend 1" above the wall frame. Set wall aside.

Siding Extends 3/4"

Below Plate

Step 1 Assemble End Wall Frames Contined

Siding Extends 1"

Above Plate

Siding Extends

1/2" Above Angle

LAP Edge