Installation & Assembly

Step 1 Assemble End Wall Frames
1. Install (3) three 2x4-72" wall studs between
(2) two 48" long 2x4s. Install the center stud
in the middle of the wall frame.
Make (2) Two Frames
48" Wall Plate
Use (2) two 10d sinkers
at each end of stud.
2. Repeat to make (1) one more 48" frame.
Set aside.
3. Place (1) one of the 48" wall frames on floor positioned on the left. Square frame by measuring
diagonally (corner to corner). The measurements will be the same when square.
4. Locate the (2) two pre-built 48" wall frames. Position the one without the center stud against
the 48" wall frame with the angle part of the frame on the right.
You can temporality nail 1x4
boards, supplied in kit, to help
hold the wall frames in place.
1x4 Blocks
6. Install a 72" long 2x4 in the center of
the wall frame. Refer to the other pre-
built wall frame for proper position.
5. Nail both wall frames together
using 10d sinkers. Use (8) eight
nails per side equally spaced.
48" Frame