Installation & Assembly

1. Install 1x6 fascia over the ends of the trusses, flush with the top of the roof sheathing.
Cut a 75" long 1x6 board so to be flush with the face of left wall gable trim and center
of 3rd truss. Use 8d galv. nails.
2. Cut to fit the last 1x6x75" board and install to finish.
Air
Space
Truss
Shingles
Step 11 Install Front 1x6 Fascia
Building Tip: Install ridge vent in lieu of
shingles caps. Ridge vent provides ideal
ventilation, preventing heat and moisture from
damaging your building or its contents.
Step 12 Install Roofing — Not Supplied in Kit
1. Install metal roof edging perimeter of the roof
area. If you are not installing shingles at this time,
you can purchase felt paper to protect the roof
sheathing. Install the felt paper before you install
the metal roof edge.
2. Install shingles according to the instructions on
the wrapper. If you need more detailed instructions
on installing shingles, there are good publications
at book stores or newsstands.
1x6 Fascia
Felt
Paper
1x4 Gable Trim
Top of 1x6 Flush with Top of OSB
Center of 3rd Truss