User guide

Set Up and Maintain79
Disconnect
Note The following diagnostic functions are performed while the PDA is already connected to the lock
and the Diagnostics tab is selected.
1 To Disconnect, tap Menu and then tap disconnect.
Set
You have three options under the Set menu:
Date/Time/DST enable
Reader Technology
Online Mode
Set: Date/Time/DST Enable
Warning This feature should only be used to set time on controllers in a time
zone that observes Daylight Savings. For readers in time zones that do not observe
Daylight Savings, you will need to run Congure Lockset command on the lock to
update time.
To set Day/Time to the current time, perform the following steps:
1 Tap Menu Set Date/Time.
Figure 74 Date/Time