Service manual

Servicing Standard Mortise Trim Parts
B.A.S.I.S. V Service Manual 5–15
SERVICING THE MORTISE CASE FACEPLATE
Removing the
mortise case
faceplate
Unscrew the two faceplate screws and remove the mortise case
faceplate from the lock. Save the screws.
Reinstalling the
mortise case
faceplate
1. Secure the mortise case faceplate to the mortise case with the
faceplate mounting screws.
2. Check the lock for proper operation.
Figure 5.16 Removing and reinstalling the mortise case faceplate
Outside of door
Mortise case faceplate
Faceplate mounting screws