Service manual

Contents
B.A.S.I.S. V Service Manual ix
Servicing the motor assembly 10–16
Removing the motor assembly 10–16
Reinstalling the motor assembly 10–17
Servicing the locking plate 10–20
Removing the locking plate 10–20
Reinstalling the locking plate 10–21
Servicing the yoke 10–22
Removing the yoke 10–22
Reinstalling the yoke 10–23
Servicing the beam and beam roller 10–24
Removing the beam and beam roller 10–24
Reinstalling the beam and beam roller 10–25
Servicing the lever assembly 10–26
Removing the lever assembly 10–26
Reinstalling the lever assembly 10–27
Servicing the shear pin 10–28
Removing the shear pin 10–28
Reinstalling the shear pin 10–29
Changing the handing 10–30
MAINTENANCE 11–1
Replacing the backup battery 11–2
Removing the backup battery 11–2
Reinstalling the backup battery 11–3
Replacing or upgrading the battery pack 11–4
Removing the battery pack for a standard lock 11–4
Reinstalling the battery pack for a standard lock 11–6
Removing the battery pack for exit hardware trim 11–8
Reinstalling the battery pack for exit hardware trim 11–9
Adding key override sensing to Standard B.A.S.I.S. Mortise Locks 11–10
Performing diagnostics using a PDA 11–13
Diagnostics overview 11–13
Viewing diagnostics information 11–14
Changing a lock’s online mode 11–18
Unlocking a door temporarily 11–19
Resetting the use count 11–19
Clearing the diagnostics code 11–20
TROUBLESHOOTING 12–1
Visual and audible response quick reference 12–2
Enabling communications without a card or password 12–3
Opening a standard B.A.S.I.S. Lock with dead batteries 12–6
Responding to problems 12–7