Service manual

Servicing Standard Mortise Trim Parts
5–10 B.A.S.I.S. V Service Manual
6. Secure the escutcheons:
a. Position the inside and outside escutcheons on the door.
b. Making sure that the escutcheons do not pinch the wires, secure
the escutcheons to the door. Do not tighten the screws
completely. Use the combination mounting screw in the upper
trim hole and the standard mounting screw in the lower trim
hole.
7. Reinstall the levers, and tighten the escutcheon mounting screws.
See page 5–2.
Figure 5.11 Securing the escutcheons
Combination mounting screw
Standard mounting screw
Inside of door
Inside escutcheon