Service manual

Servicing Standard Mortise Trim Parts
B.A.S.I.S. V Service Manual 5–5
b. Remove the inside escutcheon from the door.
c. From the inside of the door, disconnect the motor connector,
the key override sensor connector (EV and FV functions), and
the deadbolt sensor connector (FV and LV functions).
Note: For a description of lock functions, see page 2–2.
d. Remove the bushings and trim hole inserts (for locks with brass
escutcheons) from each side of the door.
Figure 5.5 Disconnecting the motor connector and sensor connector
Motor connection
Key override sensor connector
Inside of door
Deadbolt sensor connector
Figure 5.6 Removing the bushings and trim hole inserts
Trim hole inserts
Bushings