Service manual

Shared Standard and Exit Hardware Trim Parts

B.A.S.I.S. V Service Manual 4–9

Battery door screw kits for standard B.A.S.I.S. Locks

The battery door screw kits described in the table below are used only

for standard B.A.S.I.S. Locks. For the battery cover and battery bracket

screw kits for EX Series Exit Hardware Trim, see the table at the bottom

of this page.

Screw and spring kits for EX Series Exit Hardware Trim

Components

Kit name Part number

McGard battery

door screw

TORX battery

door screw

McGard Battery Door Screw Kit 1839489 10

TORX Battery Door Screw Kit 1839447 25

Components

Kit name

Part

number

TORX battery cover screw

1 1/4

″ battery bracket screw

1 3/4

″ battery bracket screw

Mounting standoff

Mounting plate screw

Lever return spring

Shoulder screw (for yoke)

Lift finger screw

Motor mounting screw

Motor stop spacer

TORX Battery Cover Screw Kit 1879139 10

Battery Bracket Screw Kit for Doors

Less than 2″ Thick Kit

1879055

Battery Bracket Screw for Doors

2″ Thick or Greater Kit

1879097

Mounting Standoff Kit 1877587 10

Mounting Plate Screw Kit 1879170 10

Lever Return Spring Kit 1877545 10

Shoulder Screw (for Yoke) Kit 1879338 10

Lift Finger Screw Kit 1879411 10

Motor Mounting Screw Kit 1879370 10 10