Service manual

Shared Standard and Exit Hardware Trim Parts
4–4 B.A.S.I.S. V Service Manual
FIELD REPLACEMENT KITS
Unless otherwise noted, each kit contains a quantity of one for each
component indicated.
Reader kits The reader kits described in the table below are used for both standard
B.A.S.I.S. Locks and EX Series Exit Hardware Trim. To determine the
read head track position for magnetic stripe readers, see page 9–19. To
determine the read head track position for dual validation readers, see
page 9–15.
Components
Kit name
Part
number
Magnetic stripe reader assembly (track 1) Magnetic stripe reader assembly (track 2) Magnetic stripe reader assembly (track 3) Smart card reader assembly Dual validation reader assembly (track 1) Dual validation reader assembly (track 2) Dual validation reader assembly (track 3) HID proximity reader assembly Motorola proximity reader assembly Escutcheon gaskets Mounting plate screw Lift finger screw
Magnetic Stripe Reader (Track 1) Kit 1837869
■
†
5
■
Magnetic Stripe Reader (Track 2) Kit 1833445
■
†
5
■
Magnetic Stripe Reader (Track 3) Kit 1837900
■
†
5
■
Smart Card Reader Kit 1833560
■
†
5
■
Dual Validation Reader (Track 1) Kit 1837984
■
†
5
■
Dual Validation Reader (Track 2) Kit 1838024
■
†
5
■
Dual Validation Reader (Track 3) Kit 1838066
■
†
5
■
HID Proximity Reader Kit 1838307
■
†
5
■
Motorola Proximity Reader Kit 1838464
■
†
5
■
†. Kit includes one escutcheon gasket for standard B.A.S.I.S. Locks and one escutcheon gasket for EX Series Exit Hardware Trim.