Service manual

Contents
vi B.A.S.I.S. V Service Manual
Servicing the sensor module 6–16
Removing the sensor module 6–16
Reinstalling the sensor module 6–16
Servicing the deadbolt, turn knob hub, and spacer 6–17
Removing the deadbolt, turn knob hub, and spacer 6–17
Reinstalling the deadbolt, turn knob hub, and spacer 6–18
Servicing the cylinder clamp plate 6–19
Removing the cylinder clamp plate 6–19
Reinstalling the cylinder clamp plate 6–19
SERVICING CYLINDRICAL PARTS 7–1
Servicing the core and throw member 7–2
Removing the core and throw member 7–2
Reinstalling the core and throw member 7–2
Servicing the levers 7–3
Removing the levers 7–3
Removing the keyed lever 7–3
Removing the plain lever 7–3
Reinstalling the levers 7–4
Servicing the inside and outside escutcheons 7–5
Removing the inside and outside escutcheons 7–5
Reinstalling the inside and outside escutcheons 7–8
Servicing the rose liners 7–15
Removing the rose liners 7–15
Reinstalling the rose liners 7–16
Servicing the cylindrical chassis 7–18
Removing the cylindrical chassis 7–18
Reinstalling the cylindrical chassis 7–18
SERVICING EXIT HARDWARE TRIM PARTS 8–1
Servicing the battery cover 8–2
Removing the battery cover 8–2
Reinstalling the battery cover 8–3
Servicing the battery pack 8–4
Removing the battery pack 8–4
Reinstalling the battery pack 8–5
Servicing the battery bracket 8–6
Removing the battery bracket 8–6
Reinstalling the battery bracket 8–7
Servicing the exit hardware 8–8
Removing the exit hardware 8–8
Reinstalling the exit hardware 8–8
Servicing the core 8–9
Removing the core 8–9
Reinstalling the core 8–9