Service manual

Contents
B.A.S.I.S. V Service Manual v
SERVICING STANDARD MORTISE TRIM PARTS 5–1
Servicing the levers 5–2
Removing the levers 5–2
Reinstalling the levers 5–2
Servicing the inside and outside escutcheons 5–3
Removing the inside and outside escutcheons 5–3
Reinstalling the inside and outside escutcheons 5–6
Servicing the mounting plates 5–13
Removing the mounting plates 5–13
Reinstalling the mounting plates 5–13
Servicing the core 5–14
Removing the core 5–14
Reinstalling the core 5–14
Servicing the mortise case faceplate 5–15
Removing the mortise case faceplate 5–15
Reinstalling the mortise case faceplate 5–15
Servicing the cylinder 5–16
Removing the cylinder 5–16
Reinstalling the cylinder 5–16
SERVICING STANDARD MORTISE CASE PARTS 6–1
Servicing the mortise case 6–2
Removing and opening the mortise case 6–2
Closing and reinstalling the mortise case 6–2
Changing the hand and bevel 6–3
Changing hand and bevel quick reference 6–3
Changing the hand only 6–5
Changing the bevel only 6–5
Changing the hand and bevel 6–5
Tasks for changing the hand and bevel 6–6
Turning over the hubs 6–6
Turning over the cylinder clamp plate 6–7
Turning over the auxiliary bolt 6–8
Turning over the latchbolt 6–9
Function conversion 6–10
Removing key override 6–10
Adding key override 6–11
Adding a deadbolt 6–12
Removing a deadbolt 6–12
Servicing parts in the mortise case 6–14
Servicing the motor module 6–14
Removing the motor module 6–14
Reinstalling the motor module 6–15