Service manual

Contents
iv B.A.S.I.S. V Service Manual
Mortise components 2–17
Mortise case 2–17
Other mortise components 2–19
Cylindrical components 2–21
Cylindrical chassis 2–22
Other cylindrical lock components 2–23
EXIT HARDWARE TRIM FUNCTIONS AND PARTS 3–1
Function descriptions 3–2
Trim components 3–3
Magnetic stripe reader and trim 3–3
Smart card reader and trim 3–6
Dual validation reader and trim 3–9
Proximity reader and trim 3–12
Cylinders and related components 3–15
Mortise cylinder and related components 3–15
Rim cylinder and related components 3–16
Levers 3–17
SHARED STANDARD AND EXIT HARDWARE TRIM PARTS 4–1
Reader conversion 4–2
Converting to a magnetic stripe reader 4–2
Converting to a smart card reader 4–2
Converting to a dual validation reader 4–2
Converting to an HID or a Motorola proximity reader 4–2
Tasks to perform for converting 4–2
Field replacement kits 4–4
Reader kits 4–4
Control electronics kits 4–5
Battery kits 4–5
Lens cover kit 4–6
Cable and harness kits for standard B.A.S.I.S. Locks 4–6
Screw kits 4–7
Shared internal screw kits 4–7
Upper escutcheon screw kits for all standard B.A.S.I.S. Locks 4–7
Lower escutcheon screw kits for standard B.A.S.I.S. Locks with brass
escutcheons 4–8
Lower escutcheon screw kits for standard B.A.S.I.S. Locks with zinc
escutcheons 4–8
Battery door screw kits for standard B.A.S.I.S. Locks 4–9
Screw and spring kits for EX Series Exit Hardware Trim 4–9
Internal part kits for EX Series Exit Hardware Trim 4–10
Sensor module kits for standard B.A.S.I.S. Locks 4–10
Other system components 4–11